Creating an account has many benefits:
If you're looking for ultimate braking performance, you're looking for the Brembo GP4-RX brake calipers. The body of these calipers is made entirely from billet aluminium and consists of two mechanically connected pieces. Because of the billet material, these calipers are in fact more rigid than cast aluminium monoblock calipers. The GP4-RX will provide you with massive stopping power and insanely good control and feedback. This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision. Please note: The Brembo GP4-RX calipers were designed to work best together with a Brembo 19 RCS brake master cylinder. These brake calipers come in two sizes: 100 mm and 108 mm. As a rule of thumb, 100 mm should fit all European brand bikes with radial calipers and the 108 mm should fit all Japanese brand bikes (excluding Yamaha R1 bikes with 6-piston calipers). But to make sure, always check the center-to-center measurements of the fixing points on your own bike! You can also use the Brembo Brake Configurator to see which products fit your bike. You might also need a Brembo Caliper Spacer Kit to ensure the caliper lines up correctly. This usually happens if you're running larger diameter disc brakes but some bikes need the spacers in any case. Please refer to this document to see if and which spacer kit you need: Brembo Brake Caliper Spacer Kit chart
These brake calipers come with a pair of sintered Brembo brake pads included! Please note that these Brembo Brake Calipers are meant to be used with 2 separate brake lines, one to each caliper. Please also check if the angle of the fittings of your current brake lines will match these brake calipers. If they are angled too differently, you may need to invest in a new set of brake lines to match.
A monoblock caliper has a solid one piece construction where the pistons are fixed and move towards each other. This provides extra stiffness to the caliper, so that no flex occurs during braking. This gives you maximum braking performance and feeling.
The Brembo calipers we sell come in two different mounting distances: 100mm and 108mm. 100mm calipers will fit most European motorcycles (BMW, Ducati, KTM, Aprilia etc.) and 108mm will fit most Japanese motorcycles (Yamaha, Suzuki, Honda, Kawasaki).
Some motorcycles require a set of spacers to be placed between the front fork and the brake caliper this would ensure that the pads are properly seated on the brake disc. In addition, you must pay attention that the angle / location of the banjo bolt in front of the brake line fits well with your brake lines.
The Brembo calipers we sell come with a set of Standard Brembo Sintered pads (tt2910hh)
You submitted your review for moderation.