Creating an account has many benefits:
Pinlock offers a great solution against shield/ visor fogging.The Pinlock original insert is made of a moisture absorbing plastic and because of that you won't get any fog on your visor. The insert has a silicone seal that creates a double shield system.
This clear insert is now being supplied with the helmet as standard by most helmet manufacturers. This insert offers you clear and fog free vision under normal weather conditions.
Please note: This visor is listed as suitable for the X-Spirit III, but only if you have an X-Spirit III with the CWR-1 visor installed rather than the CWR-F visor!
A Pinlock ensures that you are condensation free in two ways. The Pinlock creates a layer of air between the visor and the Pinlock, which gives you the principle of double glazing. In addition, the Pinlock itself is made of a moisture-absorbing plastic so that the moisture from your breath does not fog up the Pinlock itself, so that you have perfect vision in all weather conditions.
To install the Pinlock you will have to remove the visor from the helmet. The Pinlock is clamped between the two pins that you can see on the left and right in the visor. The silicone edge of the Pinlock must be against the visor. To get the Pinlock between the pins, you have to flatten the visor a bit so that the Pinlock fits in between.
It is almost becoming the norm for helmets to be fitted with a Pinlock-ready visor or even to be supplied with a Pinlock. To check if your helmet is Pinlock-ready, simply look for 2 pins one on the left and one on the right.
In terms of operation they are the same, but a MaxVision Pinlock falls into a recess in the visor of the helmet, which allows it to have a larger surface and you have better visibility.
You submitted your review for moderation.