Sale

MDS M13 FLAT BLACK

US$0.00

SIZE GUIDE

Size	XS	S	M	L	XL
CM	53-54	55-56	57-58	59-60	61-62
Inch	20.9-21.3	21.7-22	22.4-22.8	23.2-23.6	24.8-25.2

$39 shipping to the US (+$7.50 per additional item)
Ordered before 5PM CEST on weekdays? Same day shipping on stock items!
The best prices | With our lowest price guarantee

description

MDS M13

The MDS M13 is a full face helmet that provides full protection. Full face helmets provide greater protection than their open face counterparts and have a lower rate of detachment in an accident than other types of helmets. A helmet is the cornerstone of your riding protection gear; and for the most protection you need the MDS M13.

Product Information

The MDS M13 helmet has you covered. The High Resistant Thermoplastic Resin shell which is available in 2 sizes (weighing in at around 1550 grams) covers the head: front, back, top, and side. Safety studies show that 15% of impacts are to the area between the chin and visor. The MDS M13 provides impact resistant protection to this crucial area. The visor is attached utilizing AVG’s XQRS (Extra Quick Release) System. This system allows for tool less replacement of the standard scratch and fog-resistant street 12 visor in a matter of seconds. The quick release buckle makes for easy putting on and taking off of your helmet. The MDS M13 helmet features an efficient ventilation system to keep you cool. A front air intake and a rear discharge help promote airflow without buffeting the head and neck. The helmet is lined with antibacterial Dry-Comfort material which helps wick moisture away and is completely removable and washable. You don’t have to sacrifice style for safety with the MDS M13. Express your individual style. The MDS M13 comes in the standard black and white colors (matte and gloss), but stunning brush designs are available in red, blue, and silver.

Sizing

A correct fit is crucial to proper head protection. Your helmet can’t protect you if it doesn’t stay on your head. To get the proper fit you must measure your head at the largest part. Take a tape measure and measure the circumference of your head right at the brow. Then measure your head around the eyes. Take two or three measurements to be sure you’ve got it correct. This helmet is available in 5 sizes.

Size Head Circumference

XS 53 – 54

S 55 – 56

M 57 – 58

L 59 - 60

XL 61 - 62

additional information

Brand	MDS
Is on Sale	Yes
Gender	Men, Women
Homologation	ECE 22.05
Helmet design	Mono-Color

size guide

Size	XS	S	M	L	XL
CM	53-54	55-56	57-58	59-60	61-62
Inch	20.9-21.3	21.7-22	22.4-22.8	23.2-23.6	24.8-25.2

reviews

0 Reviews(s) Leave a review! +

You're reviewing: MDS M13 FLAT BLACK

You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

faq

How do I measure my helmet size?

The circumference of your head provides a good guideline for the size you need for a helmet. Use a tape measure to measure the widest circumference of your head. For most people, this point is about an inch above your eyebrows, along the junction of your ear and over the lump on the back of your head. In the size chart you will find which size fits the circumference of your head in cm.

What are the different helmet fit

All heads are different and that is why manufacturers make different helmet shapes, this can be roughly categorized into three shapes: round, oval and round-oval.

Round: length and width of the head are almost the same;
Round-oval: the length of the head is slightly greater than the width;
Oval: the length of the head is significantly greater than the width.

Most motorcycle helmet manufacturers provide a predominantly round-oval fit so that they can appeal to the widest possible audience. Keep in mind that the fit of a helmet is very complex and difficult to describe exactly. Small differences may therefore also be possible within these three categories!

Are sizes the same for all brands?

In general, the helmet sizes and the corresponding number of cm do overlap. If your previous old AGV was size L, chances are you also need an L for your new Nolan. But as mentioned before, there can be small differences in fit per brand and even series. That is why it can happen that the cool new helmet you've been eyeing, even when you have measured yourself well, simply wont fit well.

How do I make sure the helmet I received actually is the right fit for me.

You can check the size and fit in the following ways:

Keep the helmet still and then try to tilt your head back into the helmet. If the helmet is too large (in the longitudinal direction), you will hit the inner shell with your nose without too much effort. Sliding a little bit is allowed, but this should only happen with the necessary resistance.
Keep the helmet still and turn your head from left to right. Again, a little sliding is allowed, but with resistance. If the helmet comes off the face completely at the temples, the helmet is too big.

A good "tight" fit is what you are looking for, after all, you don't want your helmet to suddenly start shifting while riding. If you think the helmet is too small, keep in mind that the inner lining hase to be worn in a bit, and the helmet will become a bit wider when used. The cheek pads in particular usually feel quite tight in the beginning but quickly become more comfortable. The best way to determine whether a helmet has a good tight fit or simply is to small, is to keep the helmet on at home for half an hour to an hour. If you don't start to suffer from a headache or get red pressure spots, Then it's all good!

Is an ECE approved motorcycle helmet allowed in my country?

The ECE (22.05 / 22.06) standard is recognized in many countries around the world, but not all countries accept this standard for road use. It is important that your specific helmet has the correct certification for the country you are in.

A helmet with an ECE mark is only legal for use in Europe. In Europe it is even mandatory to ride with an ECE approved helmet. If your helmet has a different quality mark, you are not allowed to use it on European roads.
The United States has its own certification for helmets, namely the DOT mark. This is therefore the only quality mark that is allowed in the USA. It is possible that a helmet is both ECE and DOT approved and is therefore legal for use in both Europe and the United States.

The USA does not require helmets in every state. If you still want to wear a helmet for safety reasons, then there can in any case be no discussion about the certification of the helmet. Want to know which rules apply per state? You read it here.

Although the above quality marks are well known and widely used, there are also countries that use their own unique quality marks and only accept these. The following countries have their own certification: USA (DOT), Brazil (NBR), Japan (JIS), China (CCC).