Creating an account has many benefits:
Clear pinlock lens for Scorpion Exo-3000 Air and Exo-920.
A Pinlock ensures that you are condensation free in two ways. The Pinlock creates a layer of air between the visor and the Pinlock, which gives you the principle of double glazing. In addition, the Pinlock itself is made of a moisture-absorbing plastic so that the moisture from your breath does not fog up the Pinlock itself, so that you have perfect vision in all weather conditions.
To install the Pinlock you will have to remove the visor from the helmet. The Pinlock is clamped between the two pins that you can see on the left and right in the visor. The silicone edge of the Pinlock must be against the visor. To get the Pinlock between the pins, you have to flatten the visor a bit so that the Pinlock fits in between.
It is almost becoming the norm for helmets to be fitted with a Pinlock-ready visor or even to be supplied with a Pinlock. To check if your helmet is Pinlock-ready, simply look for 2 pins one on the left and one on the right.
In terms of operation they are the same, but a MaxVision Pinlock falls into a recess in the visor of the helmet, which allows it to have a larger surface and you have better visibility.
You submitted your review for moderation.