WD-40 Specialist Rust Remover 250ml

WD-40 Specialist Rust Remover 250ml

Powerful and fast acting, penetrates and separates stuck parts, is highly water repellent to protect against further corrosion, usable on most surfaces.

Features:

• high kappilar effect
• lubricates and protects against rust and corrosion
• loosens seized joints
• Temperature application range: -20 to +90 °C

Specifications:

Recommended for:

• Nuts
• Locks
• Chains
• Bearings
• Tool

Hazardous substance labeling:

Signal word:

• Danger

Hazard statements:

• H222 - Extremely flammable aerosol.
• H229 - Pressurized container: may burst if heated.
• H304 - May be fatal if swallowed and enters airways.
• H315 - Causes skin irritation.
• H336 - May cause drowsiness and dizziness.
• H411 - Toxic to aquatic life with long lasting effects.

Precautionary statements:

• P101 - If medical advice is needed, have product container or label at hand.
• P102 - Keep out of the reach of children.
• P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
• P211 - Do not spray on an open flame or other ignition source.
• P251 - Do not pierce or burn, even after use.
• P261 - Avoid inhalation of vapour or aerosol.
• P273 - Avoid release to the environment.
• P280 - Wear protective gloves and eye / face protection.
• P312 - If you feel unwell, call a POISON CENTER / doctor.
• P405 - Store locked up.
• P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C / 122 °F.
• P501 - Dispose of contents / container to an approved waste disposal facility.

Supplemental Hazard Statements (EU):

• EUH208-Contains benzenesulfonic acid, di-C10-14 alkyl derivatives, calcium salts. May cause allergic reactions.

Special provisions for supplementary label elements for certain mixtures:

• May form explosive mixtures without adequate ventilation.Hydrocarbons, C7, n-alkanes, isoalkanes, cyclenesHydrocarbons, C9-C11, n-alkanes, isoalkanes, cycloalkanes, <2% aromaticsDistillates (petroleum), hydrotreated lightHydrocarbons, C7-C9, isoalkanes.

Other hazards:

• The mixture does not contain any vPvB substance (vPvB = very persistent, very bioaccumulative) or does not fall under Annex XIII of Regulation (EC) 1907/2006 (< 0.1%).
• The mixture does not contain any PBT substance (PBT = persistent, bioaccumulative, toxic) or does not fall under Annex XIII of Regulation (EC) 1907/2006 (< 0.1 %).

Hazardous ingredients:

• Hydrocarbons, C7, n-alkanes, isoalkanes, cyclenes: registration no. (REACH) - 01-2119475515-33-XXXX; EINECS, ELINCS, NLP - 927-510-4 (REACH-IT List-No.); % range - 40-50, classification according to Regulation (EC) No. 1272/2008 (CLP) - Flam. Liq. 2, H225 - Asp. Tox. 1, H304 - Skin Irrit. 2, H315 - STOT SE 3, H336 - Aquatic Chronic 2, H411
• Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cycloalkanes, <2% aromatics: Registration No. (REACH) - 01-2119463258-33-XXXX, EINECS, ELINCS, NLP - 919-857-5 (REACH-IT List-No.), % Range - 20-40, Classification under Regulation (EC) No. 1272/2008 (CLP) - Flam. Liq. 3, H226 - Asp. Tox. 1, H304STOT SE 3, H336
• Carbon dioxide - Substance subject to EU exposure limit: EINECS, ELINCS, NLP - 204-696-9, CAS124-38-9, % range - 1-5
• Hydrocarbons, C7-C9, Isoalkanes: Registration No. (REACH) - 01-2119471305-42-XXXX, EINECS, ELINCS, NLP - 921-728-3 (REACH-IT List-No.), Range - 1-5, Classification under Regulation (EC) No. 1272/2008 (CLP) - Flam. Liq. 2, H225, Asp. Tox. 1, H304, Skin Irrit. 2, H315, STOT SE 3, H336, Aquatic Chronic 2, H411
• Benzenesulfonic acid, di-C10-14-alkyl derivatives, calcium salts - Substance with specific concentration limit(s) according to REACh registry: EINECS, ELINCS, NLP - 939-603-7 (REACH-IT List-No.), Range - 0.1-<1